Front Panel Connections on AM37 mobo? NO POWER!

[Thyezer]

I just replaced a motherboard and am having troubles getting the system to power up. My front panel connections are all clearly labeled and so is the board as to where they should plug in. When I turn the system on....the Power supply fan runs, but nothing else. No power to the CPU fan or case fan. My drives are powering up, but not the harddrive? This si the first mobo installation i've done. Does this sound like a bad powersupply or did I neglect something on the motherboard? Please offer some suggestions...I, of course, am without my computer until this is figured out!!!!

Thanks!!!

 

[franklin97355]

check the connector to the motherboard and the power supply (make sure it is fully seated) Some boards have an additional four wire connector that needs to be connected. If you have one connect it otherwise I'd say you have a bad PSU.