Forwarding DID to Fax server

[telepole]

I am needibg to forward some DID numbers to a fax server group. The modems answern and the I need to send the routng digits so it can identify which fax user it is for.
How can I accoplish that?

 

[kwing112000]

I use short codes. put the fax server ports in a hunt group. say 2450 your DID is 3410. make a short code like

3410
Dial Ext
2450D3410

then send your incoming call route to 3410

Kevin Wing
ACS- Implement IP Office
ACA- Implement IP Office
Carousel Industries

 

[intrigrant]

In the following example, when someone dials 5551234, the system dials 501, which is then rerouted to the fax server:

Attach the fax modem to extension 216

Configure extension 216 with Caller Display type = DTMFB

Create a Hunt Group 500 with extension 216 as a member.

Create a User, eg. Fax501 with an extension of 501 and set Forwarding Unconditional to 500

Create an Incoming Call Route to extension 501 where the Incoming Number is the user's required personal fax number. Repeat for each user's personal fax number.

Incoming Number: 5551234

Destination: 501 Fax 501

So basically you need a user for each individual fax number.



___________________________
My achievements until now:
One wife
Four sons
Four cats
One bird ( loved by the cats )
Two rabbits
No mistress
No boat
No second home
no life...?