unclebrian78
Vendor
I have built a new app and sdn of 7200 and used ncfw of 7000 in load 23 when build 7200, i can dial the app and use it but when i try to forward my main set to it, which is a 3904, i get a busy signal, any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
forward to sdn
- Thread starter unclebrian78
- Start date
- Status
- Thread starter
- #3
unclebrian78
Vendor
not a pri just a t1 with dids coming over it, this phone is normally forward at night and during the weekend, just want to do the same thing, thought i could with an sdn
I think the easiest would be to turn your main line into the ACD/DN then build your application with Day of week Time of day send it where you want it to go. This also provides you with the ability to say add a Closed greeting for holidays, Emergencies, etc. one place to adminster the main incoming line. The only caveat would be if you are limited to how many CallPilot ports as evertime a call would come in it would use a port until it transfered from the application.
- Status
Similar threads
- Locked
- Question
- Locked
- Question