flashed bios lost cpu settings and info 1

[jadedhills]

I have a KT4V motherboard and a AMD XP2500 Barton core i recently flashed my bios and now my system says the chip is only an amd 1100 how do i set cpu clock speeds etc, please help, thanks

 

[johnodq]

After flashing the BIOS you should always set back to defaults and then set it as you want, this is because some updates make changes to address' etc.

I suggest that in future you make a list of current settings prior to flashing.

The settings for an XP2500+ are FSB 166(333) x 11X.

These are the default settings, the memory speed can be set "by SPD", most other default settings will get the system booting ok, it's then a matter of adjusting what you want as needed.

---------------
Johnodq
---------------
Please let me know if the advice I give is of help.
Feedback will benefit all

Any advice I give is my best judgement based on my interpretation of the facts you supply. Help increase my knowledge by providing some feedback, good or bad, on any advice I have given.