flash memory has been erased by mistake

[StoneColdphoneman]

My flash memory has been erased by mistake and now I can’t boot up my router 1721
What do I have to do to get my router to work?
Please help I’m desperate, any help would be appreciated.

 

[StarTAC]

perform an XModem file transfer..

u may need to modify your default baud rate from 9.6Kbps to 115.2Kbps, or else it can be really slow...

boot into ROMMON> mode, and type confreg .. follow instructions from there and u should be good to go..

then use Windows HyperTerminal and select the XModem protocol.. upload your image to the router and reboot.. u'll be covered..

i suggest keeping a copy of your image on a TFTP server, so u can boot off it when u get into such a twist..

good luck..

 

[StoneColdphoneman]

This is probably going to sound stupid but I don’t have a image for that router were can I get a default image for 1721
Thank you