I need to discover the connected MAC addresses of each device connected to a catalyst 4003. Is there a command for this ?
Something simular to show ip arp on a catalyst 2950.
Is there a way to review the arp table ?
example from a 2950:
Protocol Address age (min) Hardware Addr Type
Internet 10.1.2.3 0 00a0.c9e9.625a ARPA VLAN1
Internet 10.1.1.1 2 0004.762f.deea ARPA VLAN1
Internet 10.1.2.2 0 00a0.c9e9.5626 ARPA VLAN1
-Danny
dan@snoboarder.net
Something simular to show ip arp on a catalyst 2950.
Is there a way to review the arp table ?
example from a 2950:
Protocol Address age (min) Hardware Addr Type
Internet 10.1.2.3 0 00a0.c9e9.625a ARPA VLAN1
Internet 10.1.1.1 2 0004.762f.deea ARPA VLAN1
Internet 10.1.2.2 0 00a0.c9e9.5626 ARPA VLAN1
-Danny
dan@snoboarder.net