pecossunset
Vendor
If I have plenty of analog lines available will FMFM be able to work on a BCM50 6.0 or must it only be used on a PRI? If so is there a logical reason why it will not work on an analog line?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Find Me Follow Me using analog lines
- Thread starter pecossunset
- Start date
- Status
- Thread starter
- #3
pecossunset
Vendor
Tve read several post that contradict each other that are saying you can but as long as there is no appearance on the handset. It has to be set for ring only.
Here's a short YouTube video on the Find Me-Follow Me feature:
From the demonstration it does seem you would be required to have a PRI to be able to hand calls off between cell phones and Nortel sets instantaneously.
Brian Cox
Georgia Telephone
From the demonstration it does seem you would be required to have a PRI to be able to hand calls off between cell phones and Nortel sets instantaneously.
Brian Cox
Georgia Telephone
- Thread starter
- #5
pecossunset
Vendor
I just received an email from another Nortel technician that said he believes as a Of version 5.0 this was available for use with analog lines.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
