pointedout
Technical User
I am unable to create FFCs in LD 57. Its giving me error about customer database not present (I guess in LD 15). Can somebody guide me plz how to initiate?)
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
FFC Setup
- Thread starter pointedout
- Start date
- Status
Firebird Scrambler
Systems Engineer
Try entering "NEW" in LD 57.
All the best
Firebird Scrambler
Meridian Programmer in the UK
If it's working, then leave it alone!.
All the best
Firebird Scrambler
Meridian Programmer in the UK
If it's working, then leave it alone!.
- Thread starter
- #3
pointedout
Technical User
Thats what I have done, getting the error I quoted.
John.... should that be LD 57????
Pointed out...
1: What was the error code exactly.... remember that there are a LOT of them in Nortel land
2: What version software are you running?
3: Is this a working system?
4: What are you actually trying to achieve?... adding a Gp Hnt?... facility code?....other????
As suggested try a print
LD 57
prt
ffc
0
all
(enter)
Pointed out...
1: What was the error code exactly.... remember that there are a LOT of them in Nortel land
2: What version software are you running?
3: Is this a working system?
4: What are you actually trying to achieve?... adding a Gp Hnt?... facility code?....other????
As suggested try a print
LD 57
prt
ffc
0
all
(enter)
- Status
Similar threads
- Locked
- Question