Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Fax Server and ANI
- Thread starter bizzaro
- Start date
outbound you just need a clid table in the switch and for the provider to know your sending it.. inbound you need a class modem card for any analog station station..
in 96 enl msgo x on the d and you can see what your actually sending, enl msgi x does the same for inbound.
john poole
bellsouth business
columbia,sc
in 96 enl msgo x on the d and you can see what your actually sending, enl msgi x does the same for inbound.
john poole
bellsouth business
columbia,sc
- Thread starter
- #3
Their is no DCH associated with the T1. This is a T1 configured with EM4. It is directly connected to a fax server that is configured for robbed-bit. From the outside, I have a PRI w/DCH connected to my Meridian. A fax would hit the PRI from the outside traverse the Meridian and go out another route which is the T1 connected to the fax server. The faxes are showing up without any originating number. Hope this helps.
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question