gringotektips
Technical User
Hi Guys,
Is there any way to setup CM 5 to email a user if any faults occurr?
Is there any way to setup CM 5 to email a user if any faults occurr?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Fault Reporting
- Thread starter gringotektips
- Start date
- Status
sroush
Programmer
- Jun 5, 2007
- 47
As I remember, email is not on the CM system. (All for the best, email is ugly to set up).
There are various ways to cause email to be sent, but you always need another system to actually send the email.
Personally, I'd set up SNMP on the CM and see if I could use net-snmp (on either a windows or Linux system) to send email.
steve
There are various ways to cause email to be sent, but you always need another system to actually send the email.
Personally, I'd set up SNMP on the CM and see if I could use net-snmp (on either a windows or Linux system) to send email.
steve
phoneguy55
Programmer
snmp or use ASA to monitor alarms/trunks and send emails that way.
- Thread starter
- #4
gringotektips
Technical User
Thanks for your time guys. Very helpful
- Status
Similar threads
- Locked
- Question