Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

fastethernet module

Status
Not open for further replies.

jack57

Technical User
Joined
Feb 3, 2003
Messages
9
Can someone please confirm that this is a hardware problem.

I cannot ping the interface locally. The weird thing is that I can ping it remotely. Does someone have an explanation for that.




test interface fast 0
... Failed - timeout problem
1 interfaces: 0 passed, 1 failed, 0 skipped, 0 untestable
 
Did you try the Ping command or just the test command?

 
I tried the ping command without success which led me to issue the test command.
 
Are you trying it from the console interface. I would think that from the console you should be able to ping any of the ports on the router. I could see if you were comming in on another interface, you might not be able to ping a certian port... but other wise?????
 
Sounds like either an access-list or routing issue. Have your tried using an extended ping locally? Try that and see what happens.
 
Also try a traceroute and see where it is dying.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top