Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fan not detected

Status
Not open for further replies.

CNeeds

Programmer
Mar 24, 2004
111
US
I have computer at startup the computer says Alert!!! No Fan is detected!!! Press F1 to continue & F2 to setup. Is there any way to bypass this message at startup each time???

Thanks in advanced!!!!!
 
I would find out why it is complaining first so as not to destroy your computer.

The answer has always been 42
 
Here are my possible responses based on the information provided - choose whichever is most appropriate:

1. Get a fan that uses the 3 pin motherboard header instead of connecting directly to the power supply.

2. Replace your non functioning fan that is already connected to the 3 pin motherboard header.

3 Press F2 & change the setting for the warning message.

Steve
 
4 Make sure your fan is connected to the proper 3 pin motherboard header.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top