Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Failover PIX Connecting to One Router

Status
Not open for further replies.
AJ1982

AJ1982

Technical User
Jun 13, 2001
644
GB
Hi All,

We have a 2 port ethernet router and a failover pix setup v7, we would like to the ethetnet port on each of the Pix's into the Router to acheive configuration and redundancy, is this possible???

PIX ===Router1, Ethetnet 0
PIX Failover ===Router1, Ethernet 1

Thanks

AJ

===

Fatman Superstar (Andrew James)

CCNA, CCAI
 
Status
Not open for further replies.

Similar threads

Sameer258
  • Locked
  • Question
Need Help to Find ip and mac address with email who one open my email
Replies
0
Views
1K
Sameer258
Sameer258
Sparrow4
  • Locked
  • Question
Configure Avaya IPO R11 / VM Pro + Office365 or Exchange for voicemail to email
Replies
2
Views
809
Johnkite
Johnkite
Tommy_T
  • Locked
  • Question
Sonic wall - Have an issue remotely connectioning VNC and SMB (and AFP) to one of the 2 ISP circuits
Replies
1
Views
766
nnaarrnn
nnaarrnn
brownmab53
  • Locked
  • Question
PIX 525 ASA not allowing DHCP addresses to pass through to router
Replies
0
Views
258
brownmab53
brownmab53
xwray
  • Locked
  • Question
PIX 501 DHCP Server function
Replies
0
Views
204
xwray
xwray

Part and Inventory Search

Sponsor

Back
Top