f915...feature inactive...

[ty0004]

when i went to do a 'gentle' shut down of a NAM 4.0, i entered feature 915 and the display read feature inactive. what would cause this? what can i do to get this to work? any ideas?

 

[MarvO1]

Try 916,917 etc. sometimes the number will get quite high, especially if NAM has been on different KSU's.

MarvO said it

 

[ty0004]

thanks, yeah its now 918....who knows why? anyway it works now...

 

[exsmogger]

I find the F915 code jumps quite often. Does anyone know of a way to reset it back to F915?

Brian Cox
J & J Communications

http://www.jandjcommunications.com

brian@jandjcommunications.com

 

[MarvO1]

Brian,
I can't remember if XFTEST works for this one or not. Seems like it does not. I believe this all started when they allowed for more then 1 NAM on a system, and seems like the 915 increments if the NAM is rebooted while the KSU is unplugged, or something like that.

MarvO said it

 

[Roldan]

Marv01,

915 does jump when the KSU and NAM are rebooted, I don't know why but it doesn't seem to be consistent. This doesn't happen all the time, but I do remember using XFTEST to get it back to 915.

 

[galfaro]

I have the same problem on a 2.0 Nam on a 8x24. I cant get in on feat 915.Will the XFTEST work, and how do you do it? Also what is the range of codes for the Feat 915?
Thanks,
Gabriel

 

[exsmogger]

I have seen the F915 code jump as high as F945. I'll play with the XFTEST on a NAM today and report my findings.

Brian Cox
J & J Communications

http://www.jandjcommunications.com

brian@jandjcommunications.com