firefoxfire
Vendor
Does anyone have the instructions for programing and using the F875 ALARM feature with an M7208. The manual describes using an M7310 and the Soft Keys but nothing about the M7208
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
F875 Alarm Feature instructions for M7208
- Thread starter firefoxfire
- Start date
- Status
- Thread starter
- #3
firefoxfire
Vendor
it does work if you use feature 875 am is start pm is pound . I am unable to figure out this feature that cancels the alarm
F875, enter time in 12-hour format, * = AM, # = PM. The * key toggles the alarm for on or off.
Brian Cox
Oregon Phone
Brian Cox
Oregon Phone
norstarboy125
Vendor
Would it be feature then # to cancel? Just like every other feature?
Jeremy J. Carter
Charm City Communications
Norstar. BCM. CS1000 Programmer
Jeremy J. Carter
Charm City Communications
Norstar. BCM. CS1000 Programmer
Yes. I just tried it on my test system and F#875 turns the alarm off.
Brian Cox
Oregon Phone
Brian Cox
Oregon Phone
- Status
Similar threads
- Locked
- Question
