External Modem for Prologix V12

[MERIDIAN11C]

Hello
I have a definity prologix V12 and i know that i have to config something in the system maintenance page
about the AT commnads for an external modem
any idea ?

thanks

 

[bhanson184]

Meridian11c:

This is what we have on our Prologix. It is on page 3 of the change system-parameters maintenance. I don't know if it matters but we have G3V8.4 software.
Modem Connection: external
Data Bits: 8
Parity: none


Modem Name: usrobotics

RTS/CTS Enabled: &F1&H1 Auto Answer Ring Count (rings): S0=10
Asynchronous Data Mode: Dial Type: P
DTE Auto-Data Speed: Adjustable Make/Break Ratio:
Disable Data Compression: &K0 Dial Command: D
Enable Error Control: No Answer Time-out: S7=255
Misc. Init. Param: S12=24&W0

BHanson

 

[MERIDIAN11C]

thanks Bhanson for your answare
pretty good