External IP's and ISA

[shipmate]

I've got 6 machines that need to be exposed to the internet from behind the ISA firewall.

Do I have to give the ISA Firewall 6 external ip addesses for this? In the past with PIX firewalls, I simply statically mapped an internal address to an external address, but this doesn't seem to be the same with ISA.

When I try to publish a new server, I have the option of only one external IP, the one assigned on the external interface of the ISA Firewall.

Am I right in assuming I have to assign all those external IP's to the external interface? Am I missing something?

Thanks!

 

[lck092580]

U're correct.. our ISA has 5 external IPs assigned to it's external network card in tcp/ip properties. Once you put it in go into ISA management.. then "servers and arrays" double click on the ISA server and a window will pop up.. click on the "incoming web request" and add it in there (this is all off the top of my head so i might have named some stuff wrong).

I've heard ppl complaining about the IPs not showing up.. if that's the case then try restarting the server(yes i know this is a hassle) and see if it helps.

Hope this helps.

T