Expansion on IPO SE showing offline in manager

[bignose21]

I changed the default accounts passwords including Administrator to new passwords in the Security Settings. When I next logged into manager the Secondary server was showing an authentication error, i logged into it and updated the Administrator password and it was ok. The 3 IP500v2 gateways attached are now showing offline in manager, but ok in the web management and functioning ok. If i log into them individually with System Status I can confirm they are still on the old Administrator password. How do you log in to the IP500v2 and update the password to current as the security settings is just against the primary server?

 

[bignose21]

I tried setting the password reuse on the security settings down to 1 then putting the Administrator password back to the old one. I can login ok with it but still the IP500v2 show red in manager, if you try to make a change in web manager on them you get "object couldn't be save on xxx HTTP (Internal connection error)

 

[snowman50]

On the Primary server. Select system on the 500v2 that you want to access
Then go to file , security settings and log in.
This is like being on the 500v2 and selecting the security settings.

Change settings as required.

Do the same for each 500v2

 

[bignose21]

Yes I had gone into manager and disabled the SE Centralized in Preferences, then when you open the manager you can retry on all failed connections and put correct login. Then I could update every system individually in security settings. Now they are all the same and open ok in Manager with one password