When doing a tracerte between 2 devices, both on the local segment, it takes OVER 30 hops. Facility is fed by 2 T-1's for redundancy. If HSRP got screwed up and did not recover properly, wouldn't this cause confusion for both routers since neither would know which one is primary?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Excessive Tracerte hops between LOCAL devices and HSRP
- Thread starter ddante
- Start date
so you are just tracing from one device to another on the same lan?? which should be 1 hop but showing 30? Are the hops the same ip addresses or all different? If you issue show standby on both routers that should give you info on the hsrp group, who is master and the last time it changed.
stoney
stoney
- Status
Similar threads
- Locked
- Question
- Locked
- Question