Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ewiley: Can you do a show service-module ser0/0 and paste it in here?

Status
Not open for further replies.

donnaleezeller

Programmer
Oct 24, 2002
13
US
Router #1:

Router#show service-module ser0/0
Module type is T1/fractional
Hardware revision is 0.112, Software revision is 0.2,
Image checksum is 0x70F47262, Protocol revision is 0.1
Transmitter is sending remote alarm.
Receiver has loss of frame, AIS alarm,
Framing is ESF, Line Code is B8ZS, Current clock source is line,
Fraction has 24 timeslots (64 Kbits/sec each), Net bandwidth is 1536 Kbits/sec.
Last module self-test (done at startup): Passed
Last clearing of alarm counters 00:09:46
loss of signal : 0,
loss of frame : 1, current duration 00:09:37
AIS alarm : 1, current duration 00:09:37
Remote alarm : 0,
Module access errors : 0,
Total Data (last 0 15 minute intervals):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Data in current interval (588 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 588 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 588 Unavail Secs
Router#

Router#show controller t1

Router#


**************** ****************** *************

Router #2:


Router#show service-module ser0/0
Module type is T1/fractional
Hardware revision is 0.112, Software revision is 0.2,
Image checksum is 0x70F47262, Protocol revision is 0.1
Transmitter is sending remote alarm.
Receiver has loss of frame,
Framing is ESF, Line Code is B8ZS, Current clock source is line,
Fraction has 24 timeslots (64 Kbits/sec each), Net bandwidth is 1536 Kbits/sec.
Last module self-test (done at startup): Passed
Last clearing of alarm counters 00:02:24
loss of signal : 0,
loss of frame : 1, current duration 00:02:15
AIS alarm : 0,
Remote alarm : 0,
Module access errors : 0,
Total Data (last 0 15 minute intervals):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Data in current interval (146 seconds elapsed):
255 Line Code Violations, 0 Path Code Violations
1 Slip Secs, 146 Fr Loss Secs, 146 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 146 Unavail Secs
Router#

Router#show controller t1

Router#
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top