Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Event ID 1130

Status
Not open for further replies.

MattWray

Technical User
Joined
Nov 2, 2001
Messages
2,332
Location
US
I am also receiving this error in the directory log. This began yesterday and no changes have been made to the srver since last week.
Event Type: Error
Event Source: NTDS KCC
Event Category: Knowledge Consistency Checker
Event ID: 1130
Date: 3/29/2002
Time: 7:15:18 AM
User: N/A
Computer: TTSERVER
Description:
The automatic topology generator was unable to complete the topology for site CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=total-tech,DC=local, error code 7, and internal id f08028f.

Matt Wray
CCNA, MCP
mwray77518@yahoo.com
 
This is from using that event number
Event ID: 1130
Source NTDS KCC
Type Error
Description The automatic topology generator was unable to complete the topology for site CN=&quot;<Common Name ID>&quot;,CN=<container Common Name>,CN=Configuration,DC=company,DC=com, error code <error code>, and internal id f0802f0.
Comments Error codes:
- 7 - &quot;The storage control blocks were destroyed.&quot; - no additional info
- 20d9 =&quot;A database error has occurred.&quot; - no additional info

A.G.: From a newsgroup post: &quot;Check to see if the permissions on any of the files in the NTDS folder, including the EDB.log files, are set to Read Only; then perform the following steps:
1. When the initial restart menu is displayed, press F8 to restart the domain controller in Directory Services Restore mode, and then click Directory Services Restore Mode.
2. Verify that the Administrator and System accounts on all the files in %SystemRoot%\Ntds folder have the following permissions:
- Administrators (Full Control) System (Full Control)
 
Thanks, will try.. Matt Wray
CCNA, MCP
mwray77518@yahoo.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top