eval stack fault in Clipper using Warplink

[tioconejo]

a. Gentlemen:

I am linking an application with Warplink (wl32) and

clipper 5.2e and getting eval stack fault.

I know I have to increase the stack/procedure depth;

but how to do you do that with Warplink ?

thanks

Javier

 

[FBM357]

Not sure, but you really should consider using Blinker

"If you want SQUARE work, you DON'T cut CORNERS!!!" ...

 

[rob444]

With warplink use the:
/st:<stacksize in bytes> switch

Rob.