linedancer888
MIS
I'm going to change one of my adapters from auto_negotiate to 100_full_duplex, but I don't want to reboot. Can I just smitty chgenet and change it here or is there something else I need to do?
Thanks
Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Ethernet question
- Thread starter linedancer888
- Start date
- Status
You shouldnt need to reboot, but you will need to temporarily down your interface to change the speed.
IE:
chdev -l en0 -a media_speed=100_Full_Duplex
Its been a while since I have had to change the NIC speed, so... you may also need to down the interface first, change the speed and bring it back up.
Either way, you should not have to reboot.
IE:
chdev -l en0 -a media_speed=100_Full_Duplex
Its been a while since I have had to change the NIC speed, so... you may also need to down the interface first, change the speed and bring it back up.
Either way, you should not have to reboot.
FrankieAIX
Technical User
#ifconfig en0 down
#chdev -l en0 -a media_speed=100_Full_Duplex
#ifconfig en0 up
DONE!
Reboot not necessary.
#chdev -l en0 -a media_speed=100_Full_Duplex
#ifconfig en0 up
DONE!
Reboot not necessary.
- Status
Similar threads
- Locked
- Question