Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ethernet Cabling Pinout?

Status
Not open for further replies.

jfrelin

IS-IT--Management
Aug 12, 2002
6
US
I have a lost cable for the Enet connectivity to an opt11... does anyone know what the pinout is from the nortel amp connector to the DB15 Enet?

Thanks!

-jjf-
 
You should have an Amphenol to DB-15 cable (p/n NTDK27AA) connected to a Mini 10BT (AUI to Ethernet) Transceiver adaptor on the end of that cable. From there you can connect any standard Ethernet cable to your Ethernet hub or switch.
 
Sounds like jfrelin has lost the amp cable, as you say part NTDK27AA. Would not like trying to make one.
 
Correct.. the cable has grown legs. I have all the proper tools to do amp and d-sub cables, was just hopping to find the pin-out so I could make up another one.

Thanks.

-jjf-
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top