Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ESC key not work in hyperterminal

Status
Not open for further replies.
aarenot

aarenot

Vendor
Joined
Aug 30, 2003
Messages
2,383
Location
US
any ideas?

 
Sort by date Sort by votes
Try holding down ALT and typing on the Numeric Keypad (not the numbers above the letters) 0033 then releasing Alt.
 
Upvote 0 Downvote
Thanks Tommy! I knew there was an ALT function to do it, I just could not find it. I was about to consider buying another TE if I did not find it.

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

It wire techs
  • Locked
  • Question Question
Sip phone soft key to activate a web relay
Replies
2
Views
704
Billxx
Billxx
teknoloji
  • Locked
  • Question Question
Why is there no thread for Yeastar PBX in the forum?
Replies
2
Views
575
curlycord
curlycord
Tele-tech
  • Locked
  • Question Question
Fluke TS44 Deluxe Replacement Cords in Canada?
Replies
7
Views
1K
telemarksman
telemarksman
CPM86
  • Locked
  • Question Question
I have a customer that I do comptuer work for but helping with voip issues. 1 modem and 2 routers.
Replies
6
Views
1K
CPM86
CPM86
hamed_vrz
  • Locked
  • Question Question
Highpath 3000 SMDR not work
Replies
1
Views
274
sbcsu
sbcsu

Part and Inventory Search

Sponsor

Back
Top