Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ERS 4500 Config VLANs withe vpn router

Status
Not open for further replies.

hdaoudi

Technical User
Mar 5, 2013
5
0
0
MA
Hello Tech,

I have created 5 VLANs in my ERS 4550T-PWR switch (version: HW:09 / FW:5.1.0.8 / SW:v5.4.0.008 ) as bellow:
VLAN 10 TLAN
VLAN 20 IP_PHONEs
VLAN 30 ELAN
VLAN 40 ERS_Mgmt
VLAN 50 VPN

I want to connect the VPN router "private interface" to vlan 50 , then i will access to all other VLANs.

Could you please help me for realise this object.

thanks in advance,

 

Enable IP routing
# ip routing

Add an IP address to each vlan you want to route between
# vlan <vid>
# ip address <ipaddr> <mask>

Add ports to the vlans
# vlan ports <port> pvid <vid>

Then all you need is routing either static or dynamic (rip, ospf)

Static route, add routes to subnets on the other end of the vpn with the private as the next-hop
# ip route <dest-ip> <mask> <next-hop> <cost> enable

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top