Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

'error on page'

Status
Not open for further replies.

cobrien11

Technical User
Joined
Jul 14, 2000
Messages
110
In the bottom left of my browser it says 'error on page' after my page has loaded.
Can anyone tell me how to get rid of this? the page seems to open fine and all the links work.

The site is
On another subject you will notice at the above site that the link buttons (which are set to hide on load) are visiable while loading and then they hide, any thoughts on how to stop this?

Thanks in advance.
 
Under NS4, I get this error message (it should be the same for IE)

parent.frames[n.substring(p + 1)] has no properties.
JavaScript Error: line 19:

This error occurs after you mouse-over the menu links... I have not failed; I merely found 100,000 different ways of not succeding...
 
Thanks for the replies and forgive my ignorance but how do I fix it.

Thanks.
 
Sorry not much of a Jscript man but try that forum they may point you right Live long and make your kids suffer..
 
This is not gonna be easy to fix because its been written by the software itself...
To make your life easier try using an simpler code for the pop-up menu, if you want that lemme kno and I can email you the code, much easier... I have not failed; I merely found 100,000 different ways of not succeding...
 
PS -- if the code works fine leave it alone, only try to fix it if it causes errors or doesnt work right... I have not failed; I merely found 100,000 different ways of not succeding...
 
Go here


You've done a great job, but is overly cimplciated without the project seven extensions.

There is also a "stop javascript error" extension floating around, but I don't recommend it.

By having so many combinations or show/hide layers you've confused dreamweaver(which is often not very smart)

Got p7, you will not regret it.
 
Thanks everyone for your help.

I had a quick look at the Project Seven site and it looks great, thanks nippi.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top