Error Message in System Logs

[vti]

Hi
The server works normally which has win2k ,i can map to network but why do i get message like "No Windows NT or Windows 2000 Domain Controller is available for domain BIRBAN. The following error occurred:
There are currently no logon servers available to service the logon request. " into System Logs.


thanks for help.

 

[yizhar]

HI!

Check the event viewer on the W2K server and also the "services".
Many problems with W2K and AD are related to DNS so check this also.

Bye

Yizhar
Yizhar Hurwitz

http://come.to/yizhar

http://teachers.sivan.co.il/yizhar

 

[vti]

hi
I found the result from Technet.If you gonna need someday ;


Error Message: Domain Controller for this Domain Could Not Be Found


SYMPTOMS
When you try to add a Windows NT 4.0 Workstation-based computer to a domain, you may not be able to add the computer and you may receive the following error message:

Domain controller for this domain could not be found
Event Viewer may record event ID 5719 in the System event log:
No Windows NT Domain Controller is available for domain (domain_name).
The following error occurred: There are currently no logon servers available to service the logon request.



CAUSE
This behavior can occur if a Lmhosts file is in use, and the Lmhosts file contains an incorrect entry that is preloaded into the network basic input/output system (NetBIOS) name cache by using the #PRE extension.



RESOLUTION
If you do not need to use the Lmhosts file, disable the file:

Click Start , point to Settings , click Control Panel , and then double-click Network .


Click Protocols , click TCP/IP Protocol , and then click Properties .


Click WINS Address .


Click to clear the Enable LMHOSTS Lookup check box.


Click OK , and then click Close .


Restart your computer when you are prompted to do so

,