Error After Upgrading SAN Firmware 3

[khalidaaa]

Hi Folks,

After upgrading the SAN Controller Firmware + NVRAM + Drivers. I Started to get these errors when i booted the machine. Any idea what is this?

#  errpt -a -l 190
---------------------------------------------------------------------------
LABEL:          FCP_ARRAY_ERR6
IDENTIFIER:     B9735AF4

Date/Time:       Tue Jul  4 17:31:35 SAUS
Sequence Number: 190
Machine Id:      00C5C1EB4C00
Node Id:         s2edms
Class:           H
Type:            PERM
Resource Name:   hdisk2          
Resource Class:  disk
Resource Type:   array
Location:        U7879.001.DQDNZFK-P1-C6-T1-W200300A0B817BAC1-L0

Description
SUBSYSTEM COMPONENT FAILURE

Probable Causes
ARRAY DASD MEDIA
POWER OR FAN COMPONENT

Failure Causes
ARRAY DASD MEDIA
POWER OR FAN COMPONENT

        Recommended Actions
        PERFORM PROBLEM DETERMINATION PROCEDURES

Detail Data
SENSE DATA
0600 0308 0000 FF00 0000 0004 0000 0000 0000 0000 0000 0000 0000 0000 7000 0600 
0000 0098 0000 0000 A100 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 8000 
0008 3000 0000 0000 0000 0000 0000 0000 0000 3154 3530 3232 3336 3732 2020 2020 
2020 0612 2700 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 
0001 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 
0000 0000 0001 6022 3037 3034 3036 2F30 3930 3833 3900 0000 0000 0000 0000 0000 
0000 0000 32F1 0000 F605 2606 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 
0000 0000

regards,
Khalid

 

[khalidaaa]

OMG

I told you it is something very smiple but we are going around it in a circle

Any way, It's my pleasure to help you my friend and i wish you all the best

By the way, my weekend is over (our weekend is Thur & Friday )

So you have a nice weekend

Regards,
Khalid