jrmeridian
Technical User
Hello folks,
All of a sudden began to get err4115 on a 3000 set...anyone seen this before?
Thanks in advance.
All of a sudden began to get err4115 on a 3000 set...anyone seen this before?
Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
err4115
- Thread starter jrmeridian
- Start date
- Status
fritzthecat
Programmer
Hello, that is what the NTP says:
ERR4115
The M2317 or M3000 set has requested a restart. If set has not been manually reversed down and up and these messages consistently appear then the set, line card channel, or power supply is bad. ORIG & TERTN will show if active
in a call.
Action:
Severity: Minor. Critical to Monitor: Yes. SNMP trap: Yes
regards
Fritz
ERR4115
The M2317 or M3000 set has requested a restart. If set has not been manually reversed down and up and these messages consistently appear then the set, line card channel, or power supply is bad. ORIG & TERTN will show if active
in a call.
Action:
Severity: Minor. Critical to Monitor: Yes. SNMP trap: Yes
regards
Fritz
- Status