Hello again and thanks for the previous help. Currently I am trying to connect a Cisco 2811 router with Call Manager express through a t1 wic card into an Opt 11 TMDI card. The problem I have now is when trying to make a phone call through the PBX. I get an error code err404 (no default tree exists. I can make a phone call from the Cisco to the PBX. This PBX just had it's data base reset and I'm trying to rebuild all it's previous paths. Does anyone know what is generating it's error code?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Err 404
- Thread starter crutchie
- Start date
do you have the number you are dialing built as a dsc in ld 87? if so you may be getting 404's because the cisco is sending the number back.. do a hot trac.. ld 80 entc 0 4000 0100 return gotr.. trac;s that dn for 1 hour..
on in 96
enlc msgo x
on the d going to the cisco... that lets you see msgs sent to the cisco..
are you build qsig? or ni2...
john poole
bellsouth business
columbia,sc
on in 96
enlc msgo x
on the d going to the cisco... that lets you see msgs sent to the cisco..
are you build qsig? or ni2...
john poole
bellsouth business
columbia,sc
- Status
Similar threads
- Locked
- Question
- Locked
- Question