Chrismenzies
Technical User
I have an EPSON C200 that is reporting a WORN PHOTOCONDUCTOR even though I only replaced it a couple of weeks ago. The message does not always appear every day. Could there be a faulty sensor?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
EPSON C2000 - Error Message
- Thread starter Chrismenzies
- Start date
- Status
jediwarrior
IS-IT--Management
Hi Chrismenzies,
Try to remove it and replace it again. You may have not gotten it hooked up exactly right.
The only time you should see your error is when the photoconductor has really worn out, and the printer lets you know that. If it doesn't work, try a new one.
Jediwarrior
Try to remove it and replace it again. You may have not gotten it hooked up exactly right.
The only time you should see your error is when the photoconductor has really worn out, and the printer lets you know that. If it doesn't work, try a new one.
Jediwarrior
- Status
Similar threads
- Locked
- Question
