Enter phone to ring on two different sets

[altolabado]

If an enter phone has been programmed hot D 0, I need to program another phone ext. 7000 on the same line to ring as attendent... what is the best way to do this.

Thanks

 

[johnpoole]

that phone is hot dialed to the dn 0, only way to have another phone access to that call is to use the att over flow dn.. you can't put 0 on a set if it is your atdn.. if the att is in nights the nite dn should ring

john poole
bellsouth business
columbia,sc

 

[altolabado]

sorry ... where would this be setup?

 

[johnpoole]

ld 17 chg nit, is where you make changes to your night answer point... is your att a 2250 console?

john poole
bellsouth business
columbia,sc

 

[altolabado]

Yes it is

 

[altolabado]

can this be done in the programming of the door phone as well?

 

[johnpoole]

i would program the door phone to ring to an mcr, making that goto the console on rna, the mcr can be on several phones..with that set up the phone would hit the console after 4 rings, and then only if no one answered it a the key stations.. i have used an area bell that anyone could do a pickup on. not knowing the business setup, but their are many ways to insure that the call is answered in a timely fashion

john poole
bellsouth business
columbia,sc