Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
enabling second processor
- Thread starter mojo31
- Start date
If NT was installed with a single processor present it probably has the single processor kernel and won't see the new one.
You can tell by reading the first blue screen on boot.
If thats your issue you want to look into the uptomp.exe utility in the resource kit.
I looked into it once but I decided to just rebuild.
You can tell by reading the first blue screen on boot.
If thats your issue you want to look into the uptomp.exe utility in the resource kit.
I looked into it once but I decided to just rebuild.
RichardMoran
IS-IT--Management
This link may be of use:-
I've not tried it this way but it looks relatively simple.
Rik
I've not tried it this way but it looks relatively simple.
Rik
- Status
Similar threads
- Locked
- Question