fernandinho
Vendor
Storing non-attentive external connections SV8300 in the IP device only allowed internal, which is a history of calls made and received.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Enable SV8300 call history
- Thread starter fernandinho
- Start date
- Status
belevedere
Instructor
CMD's 1341/49/60/61 = call history settings by extension.
- Thread starter
- #3
fernandinho
Vendor
These cmd have already been made, only internal connections worked, external ones didn't work.
belevedere
Instructor
Not much left to look at. Possibly an IP phone version issue. I found this in the programming manual under call history;
8300R8 software or later is required for DT730CG/DT730DG. Also;
OUTGOING CALL HISTORY (STACK DIAL) PROGRAMMING DESCRIPTION DATA
1207 (service class)
15096 (With/without LCD)
9000>F1000 (stack dial)
08>172 (auto idle return)
08>567
8300R8 software or later is required for DT730CG/DT730DG. Also;
OUTGOING CALL HISTORY (STACK DIAL) PROGRAMMING DESCRIPTION DATA
1207 (service class)
15096 (With/without LCD)
9000>F1000 (stack dial)
08>172 (auto idle return)
08>567
- Status
Similar threads
