enable line card 1

[is2teli]

How do i enable line card? in LD 32?

 

[hawks]

Option 11
ENLC x

Option 61/81
ENLC x x x (loop/shelf/card)

 

[is2teli]

In ld 32 I did enlc and got error XMI0001 It was an analog card. but did a stat and shows idle.
checked in nortel book and shows card polling failure. Specified card did not respond to polling message
I want to amke sure no problems

 

[is2teli]

just saw your post. thanks hawks. concerned analog card ok. with error message. should i be concerned even thought stat card and ok.

 

[Johnthephoneguy]

An analog card with no sets built on it will still stay red light if thats the issue you have and are trying to enable, as soon as you build the first set it will go out.

 

[terrysdavid]

Always make sure that the card passes the self test. Make sure you see three blinks. The ld 32 and do an enlc l s c .

 

[JAAGB]

Are you sure on that card any ports are configured??
pls put stat x on ld 32 or ld 20 and see...if its not configured it wont enable

 

[is2teli]

ports are configured on that card. did stat in ld 32 - on analog card and showing TNs idle (all but two not configurd). everythign appers to be working. thanks everyone