Empty Pages driving me nuts!!

[gransbpa]

Hello,

I'm printing an Acc2000 report consisting of several subreports. Depending upon initial conditions, sometimes subreports are put to invisible. But the parent report containing the subreports keeps printing one empty page at the end. I already put all the pagebreaks in the parentreport to invisible, but this does not seem to help. This is really driving me nuts!! Can anyone help me out?

Thanks

 

[smedvid]

Check your page widths. Typically, this an issue where your report form spans the maximum length per your page setup and page size limitation. For example, I set my reports as Landscape with .5 left and .5 right margins. That means my maximum report with is 11.5 - 1.0 or 10.5. So on the report I have my report only stretched to 10.3 or 10.4 as maximum to give a little buffer zone.

So, if the width of the report is to wide, shrink it some horizontially.

htwh,

Steve Medvid
"IT Consultant & Web Master"

http://www.saveourfarm.com

Chester County, PA Residents
Please Show Your Support...