Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Emgineering menu password on BayStack
- Thread starter ineagu
- Start date
anthonyanderberg
MIS
I've seen several posts on this,
the two combinations listed most often are
CTRL-X and CTRL-H
CTRL-X works on my 350s, CTRL-H works
on my 5510s but asks for a password.
Neither work on my 425s.
Someone has also noted that CTRL-S causes
lockups... but not for me, perhaps its an
old bug fixed in recent microcode.
the two combinations listed most often are
CTRL-X and CTRL-H
CTRL-X works on my 350s, CTRL-H works
on my 5510s but asks for a password.
Neither work on my 425s.
Someone has also noted that CTRL-S causes
lockups... but not for me, perhaps its an
old bug fixed in recent microcode.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question