EC500 Block Caller - One Extension? 1

[Bondojordo]

Somehow I forgot how to block a caller from reaching one DID.

I created COR 8,
Changed CALLING PARTY RESTRICTION to NONE
Changed CALLED PARTY RESTRICTION to NONE

Created a new extension, x1014, x-ported,
then added that station in OFF-PBX as EC500 with the telephone number I wish to block.

Not working.
Any help would be greatly appreciated,
Thanks!

 

[joe2938]

ec500 call blocking

Using EC500 or Off-PBX stations will allow you to block inbound calls from specific telephone numbers at the PBX level. You need inbound caller ID in order to do this.


Step 1. Create a unique COR with the following settings:
Calling Party Restriction = ORGINATION
Called Party Restriction = INWARD


CLASS OF RESTRICTION

COR Number: 31
COR Description: System Call Blocking EC500/CSP

FRL: 0 APLT? y
Can Be Service Observed? n Calling Party Restriction: origination
Can Be A Service Observer? n Called Party Restriction: inward
Time of Day Chart: 1 Forced Entry of Account Codes? n
Priority Queuing? n Direct Agent Calling? n
Restriction Override: none Facility Access Trunk Test? n
Restricted Call List? n Can Change Coverage? n

Access to MCT? y Fully Restricted Service? n
Group II Category For MFC: 7 Hear VDN of Origin Annc.? n
Send ANI for MFE? n
MF ANI Prefix: Automatic Charge Display? n
Hear System Music on Hold? y PASTE (Display PBX Data on Phone)? n
Can Be Picked Up By Directed Call Pickup? n
Can Use Directed Call Pickup? n
Group Controlled Restriction: inactive


CALLING PERMISSION (Enter "y" to grant permission to call specified COR)

0? n 15? n 30? y 44? y 58? y 72? y 86? y
1? n 16? n 31? y 45? y 59? y 73? y 87? y
2? n 17? n 32? y 46? y 60? y 74? y 88? y
3? n 18? y 33? y 47? y 61? y 75? y 89? y
4? n 19? y 34? y 48? y 62? y 76? y 90? y
5? n 20? y 35? y 49? y 63? y 77? y 91? n
6? n 21? y 36? y 50? y 64? y 78? y 92? y
7? n 22? y 37? y 51? y 65? y 79? y 93? y
8? n 23? y 38? y 52? y 66? y 80? y 94? y
9? n 24? y 39? y 53? y 67? y 81? y 95? y
10? n 25? y 40? y 54? y 68? y 82? y 96? y
11? n 26? y 41? y 55? y 69? y 83? y 97? y
12? n 27? y 42? y 56? y 70? y 84? y 98? y
13? n 28? y 43? y 57? y 71? y 85? y 99? y
14? n 29? y

EC500/XMOBILE Method
2. Create a new XMOBILE station. Put the offending phone number (the one that you wish to block) in the "Cell Phone Number" field. Set the "Mapping Mode" to ORGINATION, and give the new station the restricted COR that you created in step 1.

Off-PBX Station Method
2a. Create a new x-port station, and give the new station the restricted COR that you created in step 1.

STATION

Extension: 16008 Lock Messages? n BCC: 0
Type: ExDgtl Security Code: TN: 1
Port: X Coverage Path 1: COR: 31
Name: *Call Block Number Map Coverage Path 2: COS: 1
Hunt-to Station:
STATION OPTIONS
Time of Day Lock Table:
Loss Group: 2 Personalized Ringing Pattern: 1
Data Module? n Message Lamp Ext: 16008
Speakerphone: 2-way Mute Button Enabled? y
Display Language: english

Survivable COR: internal Media Complex Ext:
Survivable Trunk Dest? y IP SoftPhone? n
Remote Office Phone? n


2b. Create an off-pbx-telephone station-mapping for the next extension just created. Application = CSP, Trunk Selection = ars, and the offending phone number in the "Phone Number" field. On page 2, set the Mapping Mode to "orgination"; Calls Allowed to "none"; and Bridged Calls to "none".


STATIONS WITH OFF-PBX TELEPHONE INTEGRATION

Station Application Dial CC Phone Number Trunk Config Dual
Extension Prefix Selection Set Mode
16008 CSP - 8778667485 ars 1
-

STATIONS WITH OFF-PBX TELEPHONE INTEGRATION

Station Appl Call Mapping Calls Bridged Location
Extension Name Limit Mode Allowed Calls
16008 CSP 2 origination none none




also I believe you have to look at the config set as well

 

[Bondojordo]

That was it.
I forgot to change the CALLING PERMISSION for the users COR

Thank you!

 

[montyzummer]

So i will give joe some pink for his helpful detailed answer.

ACSS (UC/SBCE/SM/SME)

Not that they mean a thing anymore , get a brain dump pass the test crash the system.

 

[joe2938]

Thanks Monty!