I have a Definity G3si running Cm2.0, I have an easy question in regards to Ports. I'm in need of one extra port for an office and we currently have one unwired port on a TN2224 card but it is labeled as Equipment Type: Attendant 2 in the swtich. How can I change this port type to be TTI port so it can be used? We no longer have a second Attendant so this port is not needed. Please let me know if you have ideas, thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Easy Port Question
- Thread starter EddieRWB
- Start date
mikeydidit
IS-IT--Management
ch con" and remove the unused attendant.
'rem att 2" you may want to do a print out using asa before hand should you ever need to reinstall it.
That should free up the port for you.
"A people that values its privileges above its principles soon loses both."
- Dwight D. Eisenhower (1890-1969), Inaugural Address, January 20, 1953
For the best response to a question, read faq690-6594
'rem att 2" you may want to do a print out using asa before hand should you ever need to reinstall it.
That should free up the port for you.
"A people that values its privileges above its principles soon loses both."
- Dwight D. Eisenhower (1890-1969), Inaugural Address, January 20, 1953
For the best response to a question, read faq690-6594
- Status
Similar threads
- Locked
- Question