virtual2000
IS-IT--Management
Hi,
We are working on a Netware 5.0 system and with Arcserve Tape Server 7.0. When we perform the daily backup, it's often seen an error message E15030 Failed to receive data/request from CSC_USR2/USR2, where CSC_USR2 is one of the netware servers and USR2 is one volume. The other volume of the same server (CSC_USR2/SYS) is backed without problems. Afer this error message, appears another E15040 Failed to receive data from CSC_USR2/USR2 (command -1). The server with problems is in this case CSC_USR2, but some days is the other server CSC_USR1. The negotiation is configured as Full duplex in all servers as well as in the switch ports.
Could someone help me?
Why some days is one server that can't be backed correctly and other days is the other server?
Why the problem is always with the USR2 or USR1 volume and not with the SYS volume of the same server?
Rafa
We are working on a Netware 5.0 system and with Arcserve Tape Server 7.0. When we perform the daily backup, it's often seen an error message E15030 Failed to receive data/request from CSC_USR2/USR2, where CSC_USR2 is one of the netware servers and USR2 is one volume. The other volume of the same server (CSC_USR2/SYS) is backed without problems. Afer this error message, appears another E15040 Failed to receive data from CSC_USR2/USR2 (command -1). The server with problems is in this case CSC_USR2, but some days is the other server CSC_USR1. The negotiation is configured as Full duplex in all servers as well as in the switch ports.
Could someone help me?
Why some days is one server that can't be backed correctly and other days is the other server?
Why the problem is always with the USR2 or USR1 volume and not with the SYS volume of the same server?
Rafa