Mar 8, 2019 #1 Aklile Tefera Instructor Joined Mar 8, 2019 Messages 4 Location US There is a red light on CS 1000 channel 31,32 E1 cards how can I eliminate this red light I reset the card physically but it is the same any advice
There is a red light on CS 1000 channel 31,32 E1 cards how can I eliminate this red light I reset the card physically but it is the same any advice
Mar 9, 2019 #2 bignose21 Programmer Joined Jul 4, 2003 Messages 2,232 Location GB Red is usually a layer 1 failure (Cable etc.) if you stat and lcnt them in LD 60 whats the alarm(s) against the Loops? Upvote 0 Downvote
Red is usually a layer 1 failure (Cable etc.) if you stat and lcnt them in LD 60 whats the alarm(s) against the Loops?
Mar 12, 2019 #3 AvayaHE Systems Engineer Joined Feb 9, 2018 Messages 135 Location CH What type of light is red? OOS ? CLK ? more details pls Upvote 0 Downvote