DyIA or MPLS

[djuplift]

Is IP Office sys capable of marking packets for voice so it can send the voice over a private MPLS using CoS?

Setting up a PAETEC DyIA (dynamic integrated access) P2P link between 2 sites, they want to know if the IP Office Control unit can mark packets using CoS for priority over an MPLS link.

I know the IP phones do 802.1p/q layer 2 CoS but does the control unit also mark the packets with CoS tags and diffserv tags?

 

[gknight1]

yes,

look under in manager under system, lan, gatekeeper

 

[djuplift]

I am aware of the Diffserv settings on the gatekeeper tab, what they are asking me is if the control unit marks packets for CoS or Class of Service.

 

[ronromano]

That is the DSCP marking.

http://www.nu-tel.com

 

[ronromano]

gknight gave the correct answer.

http://www.nu-tel.com

 

[MrIPO]

All RTP Packets at Layer 3 are tagged with Diffserv as per post by gknight.

Point 1
The IP Office Base Unit supports no L2 COS directly, only Diffserv as above

Point 2
IP phones do however have the ability to TAG 802.1q Prority 1-7 @ Layer 2 when in a Vlan enviroment.

Hope this helps

Question can somebody confirm that Point 1 is still valid for SOE.

Mr IPO

ACA - Avaya Certified Associate
ACS - Avaya Certified Specialist
ACI - Avaya Certified Instructor

http://www.iporesource.com

 

[gknight1]

yes it is still on the SOE.

 

[djuplift]

Thank you MrIPO that was the answer i was looking for, i needed to know if the control units mark the layer 2 headers with CoS tags of any kind.