Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Since I see that it's an external drive...
Steve said:ata ide cable master/slave connector position can be the opposite, e.g.; master in middle and slave at end...
PCGuide said:Connector Assignments and Color Coding: For the first time, the 80-conductor cable defines specific roles for each of the connectors on the cable; the older cable did not. Color coding of the connectors is used to make it easier to determine which connector goes with each device:
Blue: The blue connector attaches to the host (motherboard or controller).
Gray: The gray connector is in the middle of the cable, and goes to any slave (device 1) drive if present on the channel.
Black: The black connector is at the opposite end from the host connector and goes to the master drive (device 0), or a single drive if only one is used.