Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Duplex - speed question 1

Status
Not open for further replies.
hrswift

hrswift

MIS
Sep 24, 2003
48
US
I have cisco 1710 access routers at remote sites. The outside interface is connected to Nettopia DSL routers configured in bridge mode. The Cisco router outside interface (sh int) command shows Full-Duplex 10BaseT. Is this correct?
Thanks
 
Sort by date Sort by votes

The 1710 should have one 10 and one 10/100 ethernet port. The 10 full port should be on the WAN side with the fast ethernet port on the LAN side. 10 full would be the best setting as long as it does not have any duplex mismatch problems.
 
Upvote 0 Downvote
Input, CRC and Frame errors have stopped accumulating since I set it to half duplex.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Zero6
  • Locked
  • Question
question about cisco cbs 350-12xs 12 port 10g sfp+
Replies
0
Views
334
Zero6
Zero6
hairyprogrammer1
  • Locked
  • Question
What is my Speed...?
Replies
1
Views
226
iggsterman
iggsterman
Mogles49
  • Locked
  • Question
Firewall ACL question
Replies
1
Views
275
burtsbees
burtsbees
Punk6296
  • Locked
  • Question
slow WAN download speeds over UC540
Replies
0
Views
263
Punk6296
Punk6296
mkc1962
  • Locked
  • Question
Cisco 2602e connection question
Replies
0
Views
161
mkc1962
mkc1962

Part and Inventory Search

Sponsor

Back
Top