Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DUDE WITH ANALOG LINE

Status
Not open for further replies.

jftg73

Technical User
Aug 7, 2003
200
MX
I HAVE ANALOG LINES BUT WHEN I CALL FROM DIGITAL LINE OR EXTERNAL LINE AND HANG UP FROM SIDE ANALOG LINE I LISTEN BUSY SIGNAL HOW I CAN REPAIR THIS?

THANKS
 
Not sure what your asking, but are you talking about LOOP Start Analog copper trunks coming into the PBX, if so LOOP Start trunks don't work well and you should be using GRD Start trunks.

Also using all CAPS is hard to read and is concidered yelling and that is impolite.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
Is it now time to ask the OP to convert his question to English using Google's Language Tools? (The last time I suggested it, someone came along and figured out what the OP was asking...)
 
what is the trunk start type? those need to match and usually need to be ground start... could be answer supervision to no, ndec and fdec to eth on the route

john poole
bellsouth business
columbia,sc
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top