Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dual DDR?

Status
Not open for further replies.

rburke

Programmer
Apr 28, 2002
426
US
Hello everyone!

I have a question about Dual DDR. I just picked up an ASUS P4C800 and a Pentium 4 2.4C Ghz w/800 Mhz FSB. I would like to use PC3200 DDR RAM, but I'm not sure how it all adds up with the Dual DDR....

My question is if I was to buy 2x 256 MB PC3200, does that mean that it will only use it as 256 MB RAM? or 512 MB?

If anyone can let me know, or send e some links then I'd appreciate it.

Thanks!
Burke
 
It will use the full 512, sending double the data at whatever the FSB is.

Cheers,
Jim
iamcan.gif
 
You will recieve full usage of both sticks (512 MB) with twice the bandwidth of a "normal" ddr bus. The effective throughput will be up to 6.4 GBytes/sec.

The text below was pasted from the following URL


The board supports Dual-Channel memory via its four DIMM slots and can support up to 4GB of DDR400 SDRAM. Dual-channel DDR technology doubles the bandwidth of your system memory and can increase the system performance. System bottlenecks are eliminated with faster architecture and peak bandwidths of up to 6.4GB/s.

Good Luck,
Matthew

Matthew Janes

Everything in its right place...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top