Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Shaun E on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DTMF

Status
Not open for further replies.
hawks

hawks

IS-IT--Management
Oct 9, 2002
5,869
US
Anyone have a solution for passing tone to an analog device off of a MICS (not a voice mail)? The ATA will not allow the tones to pass.
 
Sort by date Sort by votes
Just a thought but have you tried F808 (long tones)
Wayne
 
Upvote 0 Downvote
feature 808 is long tones

ONLY 23 WEEKS TILL SKI SEASON STARTS
 
Upvote 0 Downvote
I'm comming in from the outside world to the MICS.
 
Upvote 0 Downvote
The IATA on a CICS passes tones back to the analog device by default,...For your ATA, perhaps ensure 'Tones On' using 'link 809'.
Link #809 turns tones off for use with a data device.
What kind of ATA are you using?
PhM

 
Upvote 0 Downvote
An ATA2 & also have an ASM.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

pmcook
  • Locked
  • Question
DTMF breakout capability
Replies
6
Views
190
pmcook
pmcook
themaritimegirl
  • Locked
  • Question
DTMF vs. three-tone paging tone
Replies
16
Views
541
themaritimegirl
themaritimegirl
Seattleguy
  • Locked
  • Question
Norstar 6x16 DTMF signal
Replies
12
Views
311
bcmfiftyfan
bcmfiftyfan
rmc334
  • Locked
  • Question
Norsar 7.1 Call pilot 2.1 not interpreting the dtmf tone 6 only on PRI
Replies
2
Views
144
allworxguy
allworxguy
Dukstr45
  • Locked
  • Question
Interact 500 not recieving DTMF from 7.0 MICS
Replies
6
Views
227
Dukstr45
Dukstr45

Part and Inventory Search

Sponsor

Back
Top