Callmaster
Technical User
Hi,
i have an issue with dtmf over ip.
i have an old definity G3siV9 System and i want to setup the DTMF over IP, but i can´t find the step in the signaling group form
Group Number: 21 Group Type: h.323
Remote Office? n Max number of NCA TSC: 1
Max number of CA TSC: 2
Trunk Group for NCA TSC: 2
Trunk Group for Channel Selection: 2
Supplementary Service Protocol: a
Near-end Node Name: clan_imcc-uk Far-end Node Name: ciscosubscriber
Near-end Listen Port: 1720 Far-end Listen Port: 1720
Far-end Network Region:
LRQ Required? n Calls Share IP Signaling Connection? n
RRQ Required? n
Bypass If IP Threshold Exceeded? n
Direct IP-IP Audio Connections? n
IP Audio Hairpinning? n
Interworking Message: PROGress
in newer systems or Releases you can administer on page 1
SIGNALING GROUP
Group Number: 21 Group Type: h.323
Remote Office? n Max number of NCA TSC: 1
SBS? n Max number of CA TSC: 2
IP Video? n Trunk Group for NCA TSC: 2
Trunk Group for Channel Selection: 2 X-Mobility/Wireless Type: NONE
Supplementary Service Protocol: a Network Call Transfer? n
T303 Timer(sec): 10
Near-end Node Name: CLAN-01C01 Far-end Node Name: CiscoSubscriber
Near-end Listen Port: 1720 Far-end Listen Port: 1720
Far-end Network Region:
LRQ Required? n Calls Share IP Signaling Connection? n
RRQ Required? n
Media Encryption? n Bypass If IP Threshold Exceeded? n
H.235 Annex H Required? n
DTMF over IP: out-of-band Direct IP-IP Audio Connections? n
IP Audio Hairpinning? n
Interworking Message: PROGress
DCP/Analog Bearer Capability: 3.1kHz
does anybody know how i can setup dtmf in an 9.5 Version
Thanks in advance
Kind Regards
With best regards
Callmaster
i have an issue with dtmf over ip.
i have an old definity G3siV9 System and i want to setup the DTMF over IP, but i can´t find the step in the signaling group form
Group Number: 21 Group Type: h.323
Remote Office? n Max number of NCA TSC: 1
Max number of CA TSC: 2
Trunk Group for NCA TSC: 2
Trunk Group for Channel Selection: 2
Supplementary Service Protocol: a
Near-end Node Name: clan_imcc-uk Far-end Node Name: ciscosubscriber
Near-end Listen Port: 1720 Far-end Listen Port: 1720
Far-end Network Region:
LRQ Required? n Calls Share IP Signaling Connection? n
RRQ Required? n
Bypass If IP Threshold Exceeded? n
Direct IP-IP Audio Connections? n
IP Audio Hairpinning? n
Interworking Message: PROGress
in newer systems or Releases you can administer on page 1
SIGNALING GROUP
Group Number: 21 Group Type: h.323
Remote Office? n Max number of NCA TSC: 1
SBS? n Max number of CA TSC: 2
IP Video? n Trunk Group for NCA TSC: 2
Trunk Group for Channel Selection: 2 X-Mobility/Wireless Type: NONE
Supplementary Service Protocol: a Network Call Transfer? n
T303 Timer(sec): 10
Near-end Node Name: CLAN-01C01 Far-end Node Name: CiscoSubscriber
Near-end Listen Port: 1720 Far-end Listen Port: 1720
Far-end Network Region:
LRQ Required? n Calls Share IP Signaling Connection? n
RRQ Required? n
Media Encryption? n Bypass If IP Threshold Exceeded? n
H.235 Annex H Required? n
DTMF over IP: out-of-band Direct IP-IP Audio Connections? n
IP Audio Hairpinning? n
Interworking Message: PROGress
DCP/Analog Bearer Capability: 3.1kHz
does anybody know how i can setup dtmf in an 9.5 Version
Thanks in advance
Kind Regards
With best regards
Callmaster