DTMF CAS trunk on TN767C supported?

[Guest_imported]

We have a Definity G3 with I believe ver.6 in our testlab. It has been only used as a PRI test unit. It currently has 5 TN767C cards all configured for PRI service back to a Class-5 CO. We need to use the PBX to test a device that is going to provide a DS1 trunk connection with DTMF / wink start. Will the TN767C card support this?

 

[dimas]

Hi,
Yes, sure TN767 supports it. You can use robbed-bit or common-channel signaling in DS1 form and TIE,WATS,CO etc. trunk-group types . More easy than ISDN-PRI (needs external D-channel board).